Are you getting red light error on your Linksys WiFi extender? Waited enough for the red LED to turn green but no luck? Well, you might be struggling with this issue due to various reasons. But, worry not. To help you fix it, we’ve mentioned some troubleshooting tips in this article. So, let’s get down to them, shall we?
Fixed: Linksys Extender Red Light Issue
Reboot Your Linksys Extender
Before you give any another troubleshooting hack a try, consider rebooting your Linksys WiFi extender. To initiate the process, follow the guidelines mentioned below:
- Power off your Linksys extender.
- Unplug it from the wall outlet.
- Wait for some time.
- Plug the Linksys extender back into the wall outlet.
- Press the Power button.
If restarting your device didn’t resolve the red light issue for you, then continue reading.
Check the Power Supply
Chances are that your Linksys extender is not receiving enough power supply from the wall outlet. And that might be because the wall socket is damaged. To troubleshoot the issue, we recommend you either get your current wall outlet fixed or plug your Linksys WiFi range extender into another one.
Perform Firmware Update
Updating the firmware of your Linksys wireless extender by accessing the Linksys extender login page can also help you get rid of the red light issue. So, follow the steps given below and learn how to perform Linksys extender firmware update:
- Plug your Linksys extender into a working wall outlet.
- Press the Power button.
- Wait for the power LED to become green.
- Next, connect your Linksys extender and the WiFi router.
- You can connect them using a wire or wirelessly. The choice is yours.
- Open an internet browser on your laptop.
- Log in to your Linksys WiFi range extender using the default login credentials.
- Head over to the Settings menu and click Maintenance.
- Select Firmware Update and follow the on-screen prompts.
In this way, you’ll be able to perform Linksys firmware update. Now, check whether you are still facing the red light issue with your device or not. If you are, then give try the next hack.
Pro Tip: Access the Linksys router login page and follow the same instructions if you want to update the firmware of your wireless router to the latest version.
Replace the Ethernet Cable
Sometimes, if a worn out or damaged Ethernet cable is connecting your extender and router, that too can force you to experience the Linksys red light issue. Therefore, make sure that the cable connecting your devices is free of damages. If required, replace the cable with a new one immediately.
Check For Signal Interference
For your Linksys extender to function smoothly, it is important that it is kept away from WiFi interference. Thus, keep your Linksys WiFi range extender away from cordless phones, washing machines, baby monitors, Bluetooth speakers, mirrors, fish tanks, refrigerators, microwave ovens, treadmills, televisions, aluminum studs, etc.
Reconfigure Your Extender
If nothing has worked for you so far, then your last resort is to reset and reconfigure your Linksys range extender. To do restore your device to the factory default mode, follow the below-mentioned instructions:
- Look for the Reset button on your Linksys extender.
- Once found, carefully press it using a sharp object.
- Wait for some time.
As soon as you are done performing default factory reset, do not forget to perform Linksys extender setup from scratch. If you are not sure about the guidelines to set up your wireless device, then it is highly recommended that you refer to the user manual.
Final Thoughts
Our guide to troubleshoot the Linksys extender red light issue has come to an end here. We hope that the troubleshooting tips mentioned in this post helped you get rid of a blinking red LED. If you have any other way through which you managed to fix the Linksys red light issue, feel free to share it with us through the comment section. We’ll be happy to learn something new.
